Enhance the growth of plants in breeding, prevent plants from virus infection, provide clean water and an excellent environment for plants to grow.
Commercial Model
| Voltage | Personalization |
| Water Discharge | 12 ~ 25 ℓ / min |
| OZONE (O3) Density in Water | 0.6 ppm~1.2 ppm |
| OZONE (O3) Density in Air | Below 0.01 ppm |
| Power Consumption | 15W |
| Size | 215(H)*180(L)*110(D) mm |
| Temperature Range for Application | 5°C ~ 45°C (not exceed 60°C) |
| Weight | 4.2 kgs |
| Else | Required water pressure above 1 kg/cm² |
Professional Water Immersion Model
| Voltage | Personalization |
| Water Discharge | 12 ~ 25 ℓ / min |
| OZONE (O3) Density in Water | 0.8 ppm ~ 1.8 ppm |
| OZONE (O3) Density in Air | Below 0.01 ppm |
| Power Consumption | 45W |
| Size | 350(H)*400(L)*130(D) mm |
| Temperature Range for Application | 5°C ~ 45°C (not exceed 60°C) |
| Weight | 8.5 kgs |
| Else | 1. Continuous use 4 hours requires 30 minutes break 2. Required water pressure above 1 kg/cm² 3. Accessories: Brightozone's special stainless steel flexible pipes |
Professional Water Immersion Model
| Voltage | Personalization |
| Water Discharge | 12 ~ 25 ℓ / min |
| OZONE (O3) Density in Water | 0.8 ppm ~ 1.8 ppm |
| OZONE (O3) Density in Air | Below 0.01 ppm |
| Power Consumption | 45W |
| Size | 400(H)*350(L)*135(D) mm |
| Temperature Range for Application | 5°C ~ 45°C (not exceed 60°C) |
| Weight | 12 kgs |
| Else | Can be used with pressurized motors |
Professional Spray Gun Combination Model
| Voltage | Personalization |
| Water Discharge | 12 ~ 14 ℓ / min |
| OZONE (O3) Density in Water | 0.5 ppm ~ 1 ppm |
| OZONE (O3) Density in Air | Below 0.01 ppm |
| Size | Machine: 1300(H)*520(L)*760(D) mm Spray gun: 650(H)*200(L)*40(D) mm |
| Temperature Range for Application | 5°C ~ 45°C (not exceed 60°C) |
| Else | 1. required water pressure above 1.5 kg/cm² 2. Using clean water as backup source of water 3. Length of power line is 10 m |
Professional Water Immersion Model
| Voltage | Personalization |
| Water Discharge | 5 tons / hr |
| OZONE (O3) Density in Air | Below 0.01 ppm |
| Size | 800(H)*395(L)*140(D) mm |
| Temperature Range for Application | 5°C ~ 45°C (not exceed 60°C) |
| Else | Must be used with pressurized motors |
Professional Water Immersion Model
| Voltage | Personalization |
| Water Discharge | 20 tons / hr |
| OZONE (O3) Density in Air | Below 0.01 ppm |
| Size | 800(H)*1580(L)*140(D) mm |
| Temperature Range for Application | 5°C ~ 45°C (not exceed 60°C) |
| Else | Must be used with pressurized motors |
Mist Sprayer Model
| Voltage | Personalization |
| Water Discharge | 1 ~ 3 ℓ / min |
| OZONE (O3) Density in Water | 0.5 ppm |
| OZONE (O3) Density in Air | Below 0.01 ppm |
| Size | 360(H)*305(L)*114(D) mm |
| Temperature Range for Application | 5°C ~ 45°C (not exceed 60°C) |
| Else | Can be used with pressurized motors |